• Replacement method of embroidery electromechanical control fuse

    Replacement method of embroidery electromechanical control fuse

    If the customer blows out the fuse in the process of using the machine, the fault needs to be removed in time, otherwise the machine will be damaged or even cause a fire. Before replacing the fuse, the "blue cricket" reminds you to cut off the power supply and replace the fuse with the same specification afte... read more

    Jan 03, 2020News
  • Treatment of old broken thread of embroidery machine

    Treatment of old broken thread of embroidery machine

    1. The tension of the bottom thread is too large, and the processing method: Reasonably adjust the tension of the pressure plate and the shuttlecock evenly. 2. The needle is cut off quickly, and the handling method is to change the needle. 3. The thickness of the needle does not match the embroidery thread. T... read more

    Jan 11, 2020News
  • Slip spindle motor climbing solution

    Slip spindle motor climbing solution

    Analysis and judgment methods 1. Adjust the potentiometer VR1 on the spindle control board counterclockwise. 2. After climbing VR1, climb the car. Check if there is any problem with capacitor C6 on the spindle control board? 3. Check whether the top wire connecting the photoelectric encoder and the shaft is l... read more

    Jan 21, 2020News